lab mixing mill, lab rubber compound mill (XK-160)
1. Function
The machine is suitable for the mixing and kneading rubber,
synthetic rubber, hot melt adhesive, EVA, chemical medicine, ensure
the dispersion of raw material and used for small test or small
production.
2. Construction Features
(1) Roller is made from cast iron, wear resistance and long service
life. Internal water cooling system, it can use steam heating or
electrical heating. The temperature difference between rollers can
be controlled in 2 degrees or minus. The rollers surface through
mirror polishing processing.
(2) The space between rollers is having manual and electric adjust
ice two kinds.
(3) Frame is made by steel plate welding, so have good rigidity
structure, and beautiful appearance after annealing and eliminating
inside stress.
(4) Bedplate is as a whole structure, using steel welding operation
and has high stability.
(5) Bushing is used the bearing-type bussing, lined with
high-strength bearings, forced closed lubrication system to ensure
it does not leak oil during the operation of the machine.
(6)The brake system use the perfect emergency stop setting, can
maximum guarantee the safety of the staff and equipment use
(7) The gear of reduction gearbox use cylinder-shaped, hard tooth
surface is 20CrMiTi, through quenching and carburizing processing,
hardness is HRC57.
(8) Splice plate: Clear mixture device designed, easy to clean.
(9) High design: Humanization, reduce the labor intensity of the
operator.
(10) After the completion of the machine assembly, the machine
passed load test within 4-6 hours, reducing the debugging expense
and time for the customers.
| Roll Diameter | 160mm |
| Roll Working Length | 320mm |
| Roll Hardness | 50-60HRC |
| Front Roll Linear Speed | 8.95m/min |
| Ratio before and after roll | 1: 1.35 |
| Roll Range | 0--4.5 mm |
| Minimum thickness of the tablets | 0.3mm |
Contact:
W/A: +8618344700139
Mail: rubbermachine@sfcjx.com
