Hydraulic 4 Column Plate Vulcanizing Press/Rubber Oil Seal Making
Machine
Main Usage:The frame type plate vulcanizer applies to vulcanize all kinds of
rubber and plastic mould products as well as non-mould products.
Main Features:1 The machine is in frame structure with below pressing form
(upwards). Under the working hydraulic pressure, the embolism
ascends to make hot plate close for getting pressure, while the
embolism descends (namely hot plate turning on) by deadweight of
hot plate, platform and embolism to drive working fluid to fuel
reserve tank to achieve the aim of descending (namely turning on).
2 Made of nodular cast iron, the oil cylinder of machine is
improved in compressive strength and wear resistance. Seal ring
made of oil-proof rubber is placed in oil cylinder to have sealing
effect in working process of this machine.
3 Combined oil pump, power source of the machine, provides working
fluid with certain pressure. Working fluid enters into oil cylinder
by control valve to make control handle on control valve turn to
different places, and then embolism is able to ascend or descend.
Adopting tubular electric-heating component to heat up, the machine
can reduce air pollution to keep workshop clean without boiler.
4 The machine is beautiful in shape, rational in structure,
convenient in control, safe and credible as well.
If you are interested in our products or have any questions please
contact us freely. We will try our best to meet your requirement at
first time.
Brief self-introduction:Our factory has nearly 30 years' experience in manufacturing rubber
machine.
We have a set of standardized production line, which contains wire
peeling machine, rubber cutter,
Grinding mill, shredder, screen conveyor, rubber crusher, shaker,
banburying mixer, open mill, spiral elevator,
Kneader, rubber filter and extruder, vulcanizer, refiner,
calendering machine.
Specification:1. We can provide our customers with various of plate vulcanizing
press
2. Column type and c-frame type
3. The capacity of our products can range from 25-5000T
4. We have the certificate of SGS/CE/BV/ISO9001: 2008
Main Parameter:Parameter
/Type | XLB240×
240× 2 | XLB350×
350× 2 | XLB400×
400× 2 | XLB500×
500× 2 | XLB600×
600× 2/4 | XLB700
× 700× 2 | XLB750
× 850× 2/4 | XLB900
× 900× 2Q |
| Total Pressure (MN) | 0.15 | 0.25 | 0.5 | 0.63 | 1.00 | 1.20 | 1.60 | 2.00 |
| Plate Distance (mm) | 125 | 125 | 125 | 125 | 125 | 125 | 200 | 300 |
| Working Layer NO. | 2 | 2 | 2 | 2 | 2-4 | 2 | 2-4 | 2 |
Unit Area Pressure
of Hot Plate (Mpa) | 2.60 | 2.04 | 3.13 | 2.52 | 2.77 | 2.45 | 2.51 | 2.47 |
| Plunger Stroke (mm) | 250 | 250 | 250 | 250 | 250/400 | 250 | 400 | 400 |
| Heating Mode | Electric | Electric | Electric/
Stream | Electric/
Stream | Electric/
Stream | Stream | Electric/
Stream | Stream |
| Motor Power (kw) | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 5.5 |
Size: (L× W× H)
(mm) | 1200× 350
× 1300 | 1400× 480
× 1380 | 1600× 500
× 1480 | 1750× 600
× 1540 | 1880× 720
× 1680 | 2000× 850
× 1750 | 2250× 1200
× 2200 | 1400× 900
× 2400
(Mainframe) |
Our Services
♦ Our engineers can design target machines for customers and send
them the drawing to confirm. We are always on the side of saving
your cost.♦ In the process of production, we will take photos and send to
customers for their track the progress.♦ Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.♦ We could supply free English foundation DWG, installation
drawing, user guide, maintenance manual and part drawing.♦ We supply overseas engineer service and help to train your
workers to operate the machine.
