Down Stroke Rubber Flooring Tiles Making Machine from Rubber Powder
/ Waste Tyre
The complete making line including 2sets mixers, rubber tile
vulcanizing machine and molds. It is mainly used to produce various
size of rubber tiles from 1-5mm rubber granules.
Remarks:
Heating platen size, space of heating platen, layers, ways of
heating could be produced as customer's requirement.
We also can according to the customers' requirement, and design the
non-standard type of rubber tile press.
1. Rubber tile making machine is used to make various types of
floor tiles with different diameter as you required. With one set
Vulcanizing machine, we can make many types tiles only by changing
the moulds.
2. This kind machine has three different types, frame type, pillar
type and jaw type. It is high efficient with large output,
automatic control, easy operation and safety guaranteed.
3.The working layer can be designed as customer's request, 2, 4, 6,
etc
4. We can customize the moulds according to your special
requirements.
| Model | XLB-D550x550 | XLB-D1100x1100 |
| Total Pressure (ton) | 50 | 120 |
| Heating Plate Size ( mm) | 550x550x45 | 1100x1100x50 |
| Distance Between Heating Platen (mm) | 150 | 150 |
| Working Layer Number | 4 | 1 |
| Piston Stroke (mm) | 400 | 150 |
| Motor Power (KW) | 3.0 | 4 |
Flow chart of rubber tile making machine
Mixing: Pour the rubber granules and coloring pigment into the
rubber mixing machine, with some adhesive, then begin staring. It
will take 4-6 minutes to be done.
Weighing: weigh the stirred rubber powder according to the floor
tiles thickness you want to make.
Paving and Pressing: pour the needed quantity rubber powder into the mould, and float
it by trowel. On the bottom , can be with some coarse and black
rubber powder, but on the surface should be with fine and colored
powder, it can ensure your tiles quality.
Vulcanization Moulding: Put the mould on the vulcanizer layer,
generally , it take 3-8 minutes to make the tiles, time difference
based on the thickness of the tiles you ready to make. After
finished, it will automatic separated, then put it somewhere to
dry.
Inspecting: Inspect the tiles' surface . If no aberration, no flaw,
then it is of high quality products.
We can also design and produce according to customer’s requirement.
If you are interested in our products or have any questions, please
contact us freely. We will try our best to meet your requirement in
the first time.
Our Services:
1. Pre-sales Service:
Freely provide project designing, Professional suggestions, Quicky
Response!
2. Medium-sales Service:
Accompany you to complete the purchasing, shipping, installing and
training
3. After-sales service:
18 months quality guarantee, Life-long Maintenance, Engineer is
available to go overseas install and train your workers.
