55 Litres Rubber Kneader / Rubber Dispersion Mixer / Intensive
Mixer
Specifications:
1. The plastic material in airtight plastic pressure under the
condition of refining or mixed refine, high production efficiency,
low labor strength, stable quality. The two edges rotor shearing
type, the production process the plastic materials that can be
fully tear make the material shear well reach dispersion and
evenness.
2. The edges of the rotor peak surfacing wear-resisting hard alloy,
and mixing rubber room and material part of the contact all use
hard chromium plating fine polishing processing. Mixed refine
chamber adopts clip set of type structure, can be out
water/steam/medium oil, have good cooling or heating effect, adapt
to all kinds of refined rubber refining technological requirements
of the plastic.
3. From the back door charging, mixing rubber room maximum flip 140
° forward unloading, and according to the customer requirement of
process can be arbitrary regulation Angle, facilitate next process
of connection.
4. The switch on the "w" type, facilitate materials can be fully
mixing rubber or refining.
5. The electric control system the programmable logic controller
(PLC), has the alarm, unloading
operation, manual/automatic conversion, chain security protection
function.
Feature:
Mixing chamber:
It consists of a "W" shape body and two side boards made of high
quality steel plates by means of extrusion forming and welding,
which are jacked to take the flow of cooling water or steam. It is
plated with hard chrome on its internal walls.
Thermal Resistance:
There is a plug-in thermal resistance in middle section of the
bottom of the chamber to be connected to electrical system to
inspect and display the temperate.
The rotors:
It is designed to the hollow blades of Banbury type. The hollows
are connected with axial hole of rotor shaft used as cooling or
heating passage. The top edges of blades and the end faces of ~
rotor shaft are surface welded with cobalt-base hard alloy and
grinding, then plating with hard chrome and polishing.
Cooling/heating system:
A common piping system is used .Cooling water/steam/medium oil is
led in three ways into the cavities of the rotor wings ,the mixing
chamber and the ram to cool or heat stock in a circulation way.
Tilting mechanism:
It consists of a rotor with brake, cycloidal gear reducer, TP type
worm and worm gear, etc.. It is able to actuate the mixing chamber
tilting by 140° around the front rotors.
| Model | X(S)N- 5x32 | X(S)N- 10x32 | X(S)N- 25x32 | X(S)N- 35x30 | X(S)N- 55x30 | X(S)N- 75x30 | X(S)N- 110x30 | X(S)N- 150x30 |
| Total Volume of Mixing Chamber (L) | 15 | 25 | 55 | 75 | 125 | 170 | 250 | 325 |
| Working Volume of Mixing Chamber(L) | 5 | 10 | 25 | 35 | 55 | 75 | 110 | 150 |
| Driving Motor Power (KW) | 11 | 22 | 37 | 55 | 75 | 110 | 185 | 220 |
| Tilting Motor Power (KW) | 1.1 | 1.1 | 1.5 | 2.2 | 2.2 | 4 | 5.5 | 11 |
| Tilting Angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 135 |
| Rotating Speed of Rotor (Front / Rear)(r/min) | 32/23.5 | 32/25 | 32/27 | 32/24.5 | 32/24.5 | 30/24.5 | 30/24.5 | 30/24.5 |
| Pressure of Cooling Water (MPA) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 |
| Gross Weight (ton) | 2.1 | 3.3 | 4.5 | 6.3 | 7.1 | 9.5 | 14.9 | 19.5 |
Our main products includes:
★ Mixing Equipment: Rubber Kneader, Two Roll Mill, Rubber Sheeting Mill, Rubber
Refining Mill, Rubber Crusher.
★ Curing Equipment: Pillar / Frame Type Plate Vulcanizing Press, Duplex Curing Press,
Rubber Tiles Vulcanizing Press, Jaw Vulcanizing Press Machine,
Large Plate Vulcanizing Machine, Automatic Plate Vulcanizing
Molding Machine, etc.
★ Extruding Equipment: Hot Feed Extruder, Rubber Strainer, EPDM Rubber Extrusion&
Vulcanizing Line.
★ Calender Equipment: Two Roll Calender, Three Roll Calender, Four Roll Calender, Inner
Liner & Rubber Calender Line.
★ Waste Tires Recycling Equipment: Semi-automatic Waste Tires Recycling Line, Full- automatic Waste
Tires Recycling Line, New Type Waste Tires Recycling Line. Fine
Rubber Powder Pulverizer.
★ Other Equipment: Reclaimed Rubber Production Line, Batch-Off Cooler, Conveyor Belt
Splicing Press, and so on.
Welcome to visit our factory!
